Serving the Olathe area  ·  (913) 355-5905  ·  Open Mon-Sun 7am-7pm
📞 (913) 355-5905 Free Quote

Metal Roofing in Paola, KS (66071) · Local Professionals

Olathe Metal Roofing · Fast response in Paola and the Olathe area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+297Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Paola's courthouse square sits at the heart of a town where late-1800s storefronts and Victorian homes line the blocks around the Miami County Courthouse, and just a few streets over you'll find farm trucks parked next to brick ranches. If your roof is original to a 1950s ranch or you're replacing hail-battered shingles on a farm shop out by the fairgrounds, you're in the right place.

Homeowners in Paola (66071) call Olathe Metal Roofing because we know how metal performs on this rolling tallgrass prairie, from the steep gables near the square to the low-slope roofs on older homes along Baptiste Drive. We're based just up the road in Olathe, so we're not guessing about local weather, permits, or the kind of hail that rolls through Miami County in April.

Metal Roofing in Paola (66071)

Paola sits on heavy clay soil that swells and shifts with the seasons, and that matters for roofing. On older homes around the courthouse square, we often find sagging decking and worn flashing where water has been running behind gutters for years. Farm buildings on the outskirts face a different set of problems: wide open exposure to west wind, hail that hits hard on low-slope barn roofs, and fasteners that work loose after a few freeze-thaw cycles. The mix here is unusual. You have Victorian and Craftsman homes with steep pitches that look great in standing seam or copper, 1950s and 60s ranches with low slopes that need careful panel selection, and newer subdivisions out toward the hospital and along Hedge Lane where complex rooflines mean more seams and more chances for leaks if the install isn't done right.

Our team has worked on roofs across Paola and the surrounding Miami County area, from historic homes near Wallace Park to metal shops on 311th Street. We know which panel profiles hold up to prairie hail, and we know when a retrofit over shingles makes sense versus a full tear-off.

Our services in Paola

How a Job Works in Paola

Step 1: You call (913) 355-5905 or request a free estimate online. We schedule a time to walk your roof and look at the decking, flashing, fasteners, and any signs of leaks. You get a written scope and a clear price before any work starts, and we'll tell you if a repair is all you need.

Step 2: Once you approve, we pull the required roofing permit through the City of Paola building department and coordinate any historic district or HOA review if your home is near the square. On tight lots around downtown, we plan panel delivery and staging so we're not blocking alleys or driveways. For farm buildings, we schedule around your operations. Installation typically takes one to three days depending on size and complexity.

Step 3: We clean up every day and do a final magnet sweep for nails and screws. You walk the finished roof with our crew lead, and we don't consider the job done until you're satisfied.

Metal roofing in Paola runs from about $5.50 per square foot for corrugated and ribbed panel roofing up to $20 per square foot for copper and specialty metal. Standing seam starts around $10 per square foot, metal shingle and stone-coated steel around $9, and a metal roof over existing shingles (retrofit) around $7. Repairs like leak fixes or flashing work start at $450, and screw replacement or re-fastening starts at $750. The biggest cost factors are roof size and pitch, how much decking repair is needed, access around the house, and whether you're replacing or retrofitting. Storm damage can add urgency, but we never inflate prices for emergencies. Call (913) 355-5905 for a free estimate specific to your Paola property.

My 1950s ranch near the Paola square has a low-pitch roof. Can metal roofing work on it?
Yes, but panel choice matters. Low-slope roofs need standing seam or a specific ribbed profile with the right overlap to shed water. We'll measure your pitch and recommend a panel that meets code and performs well in Paola's freeze-thaw cycles.
A storm just peeled back panels on my barn outside Paola. How fast can you get out?
We prioritize storm and wind damage calls in the Paola area. Call (913) 355-5905 and we'll schedule a free inspection, usually within a day or two, and tarp or secure the roof if needed before permanent repairs.
What does a typical metal roof replacement cost for a 1,500 square foot home in Paola?
Most Paola homes that size fall between $9,000 and $15,000 for a full replacement, depending on pitch, decking condition, and panel type. A free on-site estimate will give you an exact number.
Do I need a permit to replace my roof in Paola?
Yes, the City of Paola typically requires a roofing permit for a full replacement or re-roof. We handle the application and inspection scheduling for you. Rules can change, so we always confirm with the city before starting.
My house is near the historic courthouse square. Will I need special approval for a metal roof?
If your property is in a local historic district, design review may restrict panel style and color. We'll help you prepare the submittal and choose a profile that meets the guidelines while still giving you metal's durability.
Are you fully insured for work at my Paola property?
Yes. Olathe Metal Roofing carries general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Paola's climate?
Check fasteners and flashing every spring after hail season and again in late fall before winter. Clear debris from valleys and gutters, and touch up any scratched paint. We offer inspections and screw replacement if you'd rather have us handle it.
Why choose us?

Trusted professionals in Olathe

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Olathe

All your work handled by qualified professionals in Olathe

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

297+ Verified Client Reviews in Olathe

⭐⭐⭐⭐⭐ 4.9/5 · 297 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Olathe · Response within 24h · No commitment · ☎ (913) 355-5905

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Olathe ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm